Why buy a Jackon Insulation wet room kit?

Jackon Insulation wet room kits are some of the best products we have seen.

You know when a product is made in Germany that it is great quality, and these wet room kits are no exception.

Made from extruded polystrure surrounded by an outer layer made of special mortar and fibre glass, these kits are great value as they are very strong, highly rigid and thermally insulating.

Jackon Insulation wet room kits are made to standards ISO:9001 and ISO:14001, showing what good quality they are.



Other important high quality features include a watertight drain flange and a polymer faced finish.

One of the best things about buying Jackon Insulation tanking kits is the tanking liquid that they come with.

Most tanking liquids are not used by tradespeople as they take a long time to dry. This means that they use fiddly membrane tanking instead.

However, the Jackon Insulation tanking liquid only takes four hours to dry meaning that you are able to start tiling the wet room soon after it is applied.

The Jackon Insulation wet room kit is also manufactured to the highest standards ISO: 9001 and ISO: 14001, showing that the product meets high environmental and quality standards. These wet room kits can be used on concrete or wooden floors, although when used on wooden floors they need to be underboarded.

Also included in the Jackon Insulation wet room kit are preformed internal corners, a 50mm flow drain, primer and sealing tape.

Jackon Insulation wet room kits are great value for money.

We’ve spoken to lots of people who have found these wet room kits really easy to install.

Buying the right wet room kit is really important because this determines how good your wet room will be.

Why buy a Bathroom Engineering wet room kit?

Wet room kits from Bathroom Engineering are great value for money.

They are light and easy to install, saving you time.

There are three types of wet room kit you can choose from, the Form 50 shower tray, the Mainstream DECO “M” shower channel and the Bathroom Engineering Mainstream Form 22 shower tray.

Bathroom Engineering is a well respected company which makes only the best quality wetroom products.

They sell great value wet room kits which are popular with both tradespeople and DIYers.

Form 50 shower tray:

A light and easy to install wetroom kit with a tray designed to be tiled over.

Flow rate depends on the position of the tray.

A single outlet which is positioned horizontally will have a maximum flow rate of 42 litres a minute, while a single outlet which is positioned vertically will have a maximum rate of 60 litres a minute.

The wet room kit is designed to be used on concrete floors but can also be used on timber suspended joists.

Mainstream DECO “M” shower channel:

Easy to fit wetroom kit which is waterproof which can be used on any floor structure. It is best for timber over joist floors.





Includes an easy trim shower floor module and a polymer sheet waterproofing membrane item.

A high quality trap for foul air also prevent the wet room having foul odours.

Bathroom Engineering Mainstream Form 22 shower tray:

Ideal for wetrooms of any size or design. Includes a quality shower tray with built in gradients.





The wet room kit also contains a height adjustable grate.

All of these wet rooms from Bathroom Engineering are great value for money and are excellent quality.

They may be lesser known than some wetroom kits but they are excellent products.

Granfix waterproofing paste

The wetroom kits we have featured so far now come with the popular Granfix waterproofing paste.

Granfix can be used on any flat or vertical surface, and on a surface on any material.

This waterproofing kit is compatible with under floor heating.

Underfloor heating is very popular with people who have wetrooms installed.

Granfix needs to be allowed to dry overnight but the results are worth it.

A picture of a Granfix waterproofing kit can be seen below:

Why choose Wedi wetrooms?

Wedi products are outstanding quality and have an excellent design.

We’ve received a lot of emails from people with Wedi wetrooms asking us why we never featured the company before.

Two of our favourite products are the Wedi Fundo Easyset wetroom deck and the Wedi Primo Wetroom kit.

As this blog is mainly about wetroom kits, we’ll only comment about the Wedi Fundo in passing.

This well designed wetroom deck is great value for money and enables Wedi Fundo floor level showers to be raised to the correct height.

Wedi Fundo Easyset is sold in a variety of sizes and is easy to fit together. Only a few steps are needed to get the wetroom deck ready for use.

The Wedi Primo Wetroom Kit:

Sold in a variety of sizes, these kits come in two options: with a central drain and with an offset drain.

Offset drains are popular with people who don’t want to walk near the drain when they use their wet room.

The floor units are tileable, highly practical and reliable.

You have the choice of a vertical drain outlet, or a horizontal drain outlet.

Below you can see a Wedi Primo wetroom kit with a central drain outlet.

You won’t regret choosing Wedi wetrooms, they are great value for money and very stylish.

Wedi are a company which is always innovating and only sells the best quality products.

Choose a Wedi wetroom and chose high quality.

Recommended wet room kits part 3: PCS

PCS wetroom kits are really great quality, but you will only need to buy them if you want to tile your wetroom.

They can be used on timber or concrete floors.

If you don't want to tile your wetroom, we recommend a Marmox or Maxxus wetroom kit.

If you do want to tile your wetroom, we strongly recommend PCS wetroom kits.

Why buy a PCS wetroom kit?

PCS wet room kits are made from extruded foam, as opposed to aggolomerated styrene particles.

This means that there is a density loading of 30 tons per square metre,meaning that small (25mm x 25mm) mosaic tiles can be used without any risk of tiles sinking into the underlay.

While underboarding is required for the underlay, this is not a huge issue and is outweighed by the many benefits of using a PCS wetroom kit.

The boards come in a variety of sizes to ensure that whatever the size of the wetroom that you have in mind, you will be able to use a PCS kit.

What do these wetroom kits come with?

A Lastogum Tanking Kit. Lastogum kits are outstanding quality. They will cover five to seven metres square and will give two coats.

PCI Lastogum has been made by BASF in Germany for 24 years and is the finest quality. It is easy to use and is ready for tiling with no extra preparation required.

A Dallmer Drain. These drains are made by a highly recommended company which has been selling popular bathroom and wetroom products for many years.

A shower tray which can be cut to any size or shape.

Why should you buy a wetroom kit?

Are you fed up of hunting for the various parts to create a wetroom?

Do you not have the time to wait in for multiple deliveries?

Do you want to save money on multiple delivery charges?

The best way to do this is to buy a wetroom kit.

Wetroom kits contain everything you need to build a wetroom.

They are great value for money.

Some of the most popular wetroom kits are Marmox wetrooms kits, PCS wetroom kits and Maxxus wetroom kits.

All of these kits are great value for money.

Below is a picture of a Marmox wetroom kit:

Recommended wetroom kits part 2: Marmox

We strongly recommend Marmox wet room kits.

Marmox wet room kits, include the Marmox Showerlay, which is made of extruded styrene with polymer cement faces set in glass fibre mesh.

The Marmox Showerlay can easily be cut to any space.

It is easy to handle due to not being heavy, and can be fitted to timber or concrete floors, unlike some brands of wet room flooring.

Marmox Showerlay has a pre-formed slope and can be finished with tiles to ensure an attractive wetroom floor.

It allows tiles that are as small as 50mm to be placed on them without any possibility of any risk of compression through point loading.

You can also choose whether you want the drain to be in the centre of the Showerlay or whether you would like it to be offset.

Having an offset drain means that you are less likely to stand on it when you use the wetroom.

They come with PCI Lastogum, a high quality tanking kit which is regarded by many as the best tanking product on the market, and the Marmox Dallmer drain.

The Marmox Dallmer drain offers a handy choice of a vertical or horizontal drain.

Vertical drains are 120mm and horizontal drains are 83mm.

Marmox wet room kits come in a variety of sizes.

You will be able to build a fantastic wet room when you buy a Marmox wet room kits.

Bear in mind that many trade professionals recommend Marmox kits.

We have heard from lots of people who have managed to create great wet room by buying a Marmox wet room kit.

Some people begin the task of building a wet room by buying each component individually.

This takes more time and can be more expensive.

A Marmox kit is an inexpensive and easy way to build a wetroom. Richard Brennanon